905-0171
Specifications: 320mm*750mm
Features
*Compact,versatile combination machine.
*Adjustable height drill/mill head increases capacity.
*Large MT5 spindle bore.
*Large distance between center on longitudinal.
*Fine feed handle and clutch for precision milling.
*Headstock provides two step of feeds.
*Spindle is supported by high precision bearing.
*Headstock is constantly oiled during operation.
*T-slot cross slide.
*Adjustable gibs for the slideway.
*Power longitudinal & cross feed.
*Gearbox gets left and right hand threads to cut.
*High precision chuck.
*Equipped with emergency stop button.
*A reversion switch is included for added versatility.
*Tailstock may be offset for turning taper.
*Tolerance test certificate, test flow chart included.
*With the added control rod, it is easier to handle.
Specifications
|
Length |
1540 |
6053" |
|
Width |
625 |
24-3/5" |
|
Height |
1750 |
68-7/8" |
|
Shipping Weight |
500kg |
1103lb |
|
Machine Weight |
400kg |
882lb |
|
Crate Size |
1580×810×1850 |
62×32×73" |
|
Powerfeed (X-Axis) |
Yes |
|
Table Size |
130×280 |
5-1/10×11" |
|
Threading Dial |
Yes |
Lathe Specifications
|
Distance between centers |
750 |
29-1/2" |
|
Dial Calibration on Crossfeed |
0.05 |
0.002" |
|
Dial Calibration on Leadscrew |
0.05 |
0.002" |
|
Headstock Taper |
MT5# |
|
Lathe Chuck Mount |
Bolt-On |
|
Spindle Bore |
38 |
1-1/2" |
|
Spindle Speeds |
12 (60-1600 RPM/50Hz) or (75-1900RPM/60Hz) |
|
Swing over bed |
320 |
12-3/5" |
|
Swing over work table |
170 |
6-7/10" |
|
Thread pitch on processing |
0.5-4 |
9-48 1/n" |
|
Thread kinds on processing |
15 |
23 |
|
Tailstock Taper |
MT3# |
|
X-Axis Working Travel |
600 |
23-3/5" |
|
Y-Axis Working Travel |
150 |
6" |
Mill/Drill Specifications
|
Head Rotation |
360 degree |
|
Head Travel |
180 |
7" |
|
Spindle Center to Support Column |
310 |
12-1/8" |
|
Spindle to Table Distance(Min-Max) |
120-300 |
4-3/4-11-4/5" |
|
Spindle Speeds |
4(220-2620RPM/50Hz)or(240-2700RPM/60Hz) |
|
Spindle Taper |
MT3# or R8 |
|
Tool SizeLimits |
25 |
1" |
|
X-Axis Working Travel |
600 |
23-3/5" |
|
Y-Axis Working Travel |
150 |
6" |
Electrical Specifications
|
Horsepower |
1100w |
1-2/2hp |
|
Motor Type |
A/C |
|
Phase |
Single or Three phase |
|
Voltage |
110 or 220 Volts |
Gear drive power for lathe
It has 12-garde spindle gearshift for cutting, large spindle holes and large chuck
Threading Dial & Half Nut
It can be realized power feed on longitudinal or crosswise.
cut and chase threads like a master machinist. you can cut right and left-hand threads in metric and inch. with the added control rod, it is easier to handle.
Bi-directional power-feed
No stop to realized the functions of revolution and negative on the lathe. leadscrew & crossfeed screw on both lathe and mill-yield finishes,highest quality work.
Gear drive power for mill & drill-It has 4 gearshift for drilling and milling. the drilling and milling head can work with angle changed
Induction hardened, precision ground V-way bed
Quick Changeover & Two separate motors
12" mill clearance allows room for both lathe and mill setups without removing the lathe chuck. this machine is multi-purpose machine tool of bench type, it is mainly used to lathe,drill and mill. which controlled by two motor
STANDARD ACCESSORIES
1. 3-jaw chuck
2. dead center
3. allen wrench
4. double open end wrench
5. chuck wrench
6. change gear
7. drill chuck
8. machine base
SPECIAL ACCESSORIES
1. turning tool set
2. steady rest
3. follow rest
4. machine vice
5. face mill cutter
6. face plate
7. back plate(φ160/φ200)
8. four-jaw chuck(φ160/φ200)
9. step block
10. rolling center
