Features:
Having opening type structure,adding operation space, enlarging grinding range, this sharpener can grind relief,cutting edge of miller, drill,reamer ,also can grind ball end mill and tap guide cutting edge by changing different attachment
The main part of shappener is made of excerllent Aluminium it has many features such as light weight,resist rot, etc.it takes up advanced international technique of air floating, the spindle rotate flexibly after being pressed, reduce friction to lowest

Technical Data:
End mill Capacity(Dia of shankxDia of EdgexLength): 50x225x250mm /2"x9"x10"
Swing over table: 245mm /9-3/4"
Longitudinal toale travel（x Axis）: 150mm /6"
Cross travel of table（Y Axis）: 75mm /3"
Maximum wheel: 125x50x32mm /5"x2"x1-1/4"
Tilt adjutment for wheelhead: plus 35degree to minum  10 degree
Air bearing swivel: 360 degree
Air bearing stroke: 250mm /10"
Table infeed graduation : 0.02mm /0.001"
Air bearing graduation: 6.3MPa
Pipe joint diameter: 2-1/4"
Collet fit for spindle: 5C
Parallelism between two tables: 0.01mm/100mm
Parallelism of sleeve center line to worktable: 0.01mm/100mm

Order No. 439-1013