905-0166
Specifications: 300mm*470mm
Features
* Compact, versatile combination machine.
* Adjustable height drill/mill head increases capacity
* Large MT4 spindle bore.
* Fine feed handle and clutch for precision milling.
* Headstock provides two step of feeds.
* Large swing over bed gets greater capacity.
* Spindle is supported by high precision bearing.
* Headstock is constantly oiled during operation.
* T-slot cross slide.
* Adjustable gibs for the slideway.
* Power longitudinal feed allows threading.
* High precision chuck.
* A reversing switch is included for added versatility.
* Tailstock may be offset for turning taper.
* Tolerance test certificate, test flow chart included.
Specifications
| Order No. |
905-0166 |
| Dimensions( L×W×H) |
1060(40")×540(21-1/4")×750(29-1/2") |
| Shipping Weight |
230kg/507lb |
| Machine Weight |
170 kg/375lb |
| Crate Size |
1120(44")×580(23")×980(38") |
| Powerfeed (X-Axis) |
Yes |
| Powerfeed (Y-Axis) |
No |
| Table Size |
150(5-7/8")×200(7-7/8") |
| Threading Dial |
No |
Lathe Specifications
| Distance between centers |
470(18-1/2") |
| Dial Calibration on Crossfeed |
0.05(0.002") |
| Dial Calibration on Leadscrew |
0.05 (0.002") |
| Headstock Taper |
MT4# |
| Lathe Chuck Mount |
Bolt-On |
| Spindle Bore |
26(1.03") |
| Spindle Speeds |
6 (160-1600 RPM) |
| Swing over bed |
300(12") |
| Swing over work table |
160(6-3/10") |
| Thread pitch on processing |
0.5-3(11-40 1/n") |
| Thread kinds on processing |
14(20) |
| Tailstock Taper |
MT3# |
| Z-Axis Working Travel |
355(14") |
Mill/Drill Specifications
| Head Rotation |
360 degree |
| Head Travel |
80(3" ) |
| Spindle Center to Support Column |
175(6-7/8") |
| Spindle to Table Distance(Min-Max) |
240-320(9-1/2-12-3/5" ) |
| Spindle Speeds |
12 (125-1600RPM) |
| Spindle Taper |
MT3# |
Electrical Specifications
| Horsepower & Phase |
550w(3/4hp)/110V or220V (60Hz or 50Hz) |
| Motor Type |
A/C |
| Phase |
Single or 3PH |
| Voltage |
110 or 220 Volts |
STANDARD ACCESSORIES
1. There-jaw chuck
2. Dead center
3. Allen wrench
4. Double open end wrench
5. Change gear
6. Drill chuck
7. Tapered drift
SPECIAL ACCESSORIES
1. Turning tool set
2. Steady rest
3. Follow rest
4. Machine base
5. Machine vice
6. Face mill cutter
7. Face plate
8. Back plate(φ160/φ200)
9. Four-jaw chuck(φ160/φ200)
10. Step block
11. Rolling center
